Blown-In Insulations In Your Household: What Are The Benefits
by: EduaMacker
Total views: 9
Word Count: 521
Date: Tue, 13 Dec 2011 Time: 8:34 PM
0 comments
New residences that are being built today are pursuing rather strict energy efficiency standards. Needless to say, that's not the case for older properties. The best way to make your house more economical energy-wise is to add insulation. It is not easy to try and do if you have exterior side walls but it is possible with blown-in insulation in your attic. You will notice that your house will be cooler during the summer months and warmer in the winter months. If your residence is very old, you may have nothing but newspapers in your walls for insulation.
You will find that insulation technology is very advanced because of our concern for conserving energy and saving the environment. Insulating components are given an R-value, and this value is required to determine the amount of insulation needed, depending on the area of the country you live. In areas that get very cold over the winter require insulation with a high R-value while other areas may require just a lower one. Possibly the most effective solutions to reduce your heating bill is blown-in insulation. There are numerous benefits for applying this type of insulation over the standard rolls of fiberglass insulation, such as where it can be used, energy efficiency, and how it is installed.
Of the top five reasons behind applying blown-in insulation, the foremost is that it is adjustable. You are able to change the R-value by exactly how much insulation you choose to use. Regardless of whether your residence requires a high R-value insulation or low R-value insulation, all you need to do is blow the amount required to achieve the proper R-value. Another benefit for implementing blown-in, is that nearly all products use virgin materials, that have lessened the chance of allergies. A stronger seal can be achieved with blown-in insulation, since it fills all of the cracks, and empty spaces. It does not take very long to install and because all the gaps are filled, your home becomes more energy efficient.
Applying blown-in insulation is straightforward with a newly framed house. All that you have to do is to staple a netting over the studs of the exterior wall and make a couple of small holes, then place a hose in the hole and fill up the inside with insulation. The insulation will stick to the studs and expand into each of the empty spaces. After this you envelop the wall with vapor barrier and drywall it. For blow-in ceiling insulation, you initially drywall the ceiling, then blow the insulation from the attic. Its somewhat more difficult with older homes because the wall covering may need to be removed first before installation. After that the procedure is pretty much the same. If you live in a very old house, you could just drill a hole in a wall and blow the insulating material in, then cover it up.
While the initial cost is significant, it will certainly pay itself in the long run. If you prefer a comfortable and energy efficient home, then getting blown-in insulation is your best bet.
About the Author
When you need additional info click in Casas de madera.
Rating: Not yet rated
